application and maintenance of aluminum plate stock
What is the aluminium plate? How is the aluminium brazing plate produced and
processed?
Aluminum plate is a rectangular material with rectangular cross section and uniform thickness, which is made of pure aluminium or aluminium alloy by pressure processing (shearing or sawing).
Aluminum jig plate is a kind of aluminum material with thickness over 0.2 mm, width below 500 mm, width over 200 mm and length less than 16 M. Aluminum sheet is below 0.2 mm and width less than 200 mm.
Maintenance of aluminum plate cut to size stock: 1. Aluminum plates must be covered with tarpaulins during transportation, so as to prevent the invasion of rain and snow.
2. The storage environment of cutting aluminum plate should be dry, bright, well ventilated, without corrosive climate. At the same time, it should be strictly protected from rain, water and snow.
3. buy aluminum plate must be handled lightly and lightly in the process of handling, so as to prevent the surface from being damaged by knocking, which will affect the appearance of the surface.
4. When aluminium plate sheet is stored, it is suggested that you put small size on the shelf. The best way to store large size aluminium sheet is to separate it from the ground with pad wood at the bottom.
5. Aluminum sheets for oil tanker are strictly forbidden to be stored together with chemical materials and humid materials during storage.
Aluminum plate is a rectangular material with rectangular cross section and uniform thickness, which is made of pure aluminium or aluminium alloy by pressure processing (shearing or sawing).
Aluminum jig plate is a kind of aluminum material with thickness over 0.2 mm, width below 500 mm, width over 200 mm and length less than 16 M. Aluminum sheet is below 0.2 mm and width less than 200 mm.
Precision ground aluminum plates are widely used in lighting, solar
reflectors, building appearance, interior decoration: ceiling, wall, furniture,
cabinets, elevators, signs, nameplates, bags, car interior and exterior
decorations; interior decorations: such as photo frames, household appliances:
refrigerators, microwave ovens, audio equipment, etc.
Maintenance of aluminum plate cut to size stock: 1. Aluminum plates must be covered with tarpaulins during transportation, so as to prevent the invasion of rain and snow.
2. The storage environment of cutting aluminum plate should be dry, bright, well ventilated, without corrosive climate. At the same time, it should be strictly protected from rain, water and snow.
3. buy aluminum plate must be handled lightly and lightly in the process of handling, so as to prevent the surface from being damaged by knocking, which will affect the appearance of the surface.
4. When aluminium plate sheet is stored, it is suggested that you put small size on the shelf. The best way to store large size aluminium sheet is to separate it from the ground with pad wood at the bottom.
5. Aluminum sheets for oil tanker are strictly forbidden to be stored together with chemical materials and humid materials during storage.
评论
发表评论