Aluminum 1100 with excellent workability

Aluminum 1100 pure aluminum. It is soft and ductile with excellent workability. Ideal for applications involving intricate forming because it work-hardens more slowly than other alloys. It has the highest thermal conductivity of any aluminum alloy and its electrical conductivity is second only to the electrical conductor grade.
1100 aluminum alloy is one of the widest used alloys, with excellent forming properties in annealed states and may be suitable for bending, spinning, drawing, stamping, roll forming, and many other applications.
The Typical Applications of aluminium 1100 alloy: Kitchenware, Giftware, Decorative trim, Intricate formed parts, Chemical and food processing industry parts.
Available products: Flat Sheet Only
Typical Chemical Analysis: *Cu – .05/.02 *Si + Fe – .95 Max. *Mn – .05 Max.* Zn – .10 Max.*Al-Remainder
Typical Mechanical Properties**
Tensile Strength (PSI) 18,000
Yield Point (PSI) 17,000
Elongation*** 9
* Chemical Analysis will vary on each heat number
**All values are averaged values and are representative.
*** % in 2″

Temper – This product can be obtained in various tempers (the most commonly used temper for this product is “H14”) – to understand more about tempers, contact us (Email:sarah@aluminium24.eu) directly please.

评论

发表评论

此博客中的热门博文

What is the difference between aluminium foil and sheet

What is the difference between aluminium foil and sheet ? aluminium foil is any thickness of material thinner than .006". Material thinner than .0005" thick, has become more known as converter foil and can be manufactured down to .00015" thick. In contrast, sheet material ranges from .006" up to .080" thick, regardless of the metal type. If you are looking for thickness greater than .080", the product you desire is considered metal aluminum  sheet. When it comes aluminium foils specification: Alloy:8011/1235/1100/1145/3003 Temper: O/H32/H18 Width:200-1300mm Thickness:0.006mm -0.2mm when it comes aluminium sheets specification: Grade: Series: 1050, 1060, 1070, 1100, 1200 and 1235 Series: 3003, 3004, 3005, 3104, 3105 and 3A21 Series: 4045 and 4343 Series: 5005, 5052, 5083, 5086, 5154, 5182, 5251 and 5754 Series: 6061, 6063, 6082 and 6A02 Series: 7005 and 7075 Series: 8006, 8011 and 8079 Continuous casting and hot rolled both available We cr
阅读全文

Application of aluminum plate in different industries

图片
Aluminum plates are widely used in various fields, such as ships, refrigerators, dies, aerospace equipment and so on. Applications of Alloy Aluminum Sheet : Ships The most important feature of shipbuilding is that the material used should have good performance, not easy to wear and corrosion, so alloy aluminum plate is the best choice of materials. Because the alloy aluminium plate is mainly made of aluminium material, it has good performance, is not easy to damage, has a long service life, and can meet the requirements of ship production. Application of Alloy Aluminum Plate: Refrigerator The most important feature of refrigerator production is to have good sealing. Refrigerators need refrigeration and fresh-keeping effect in the process of using, so the material used can meet these two requirements, so alloy aluminum plate is the best choice. Because the sealing performance of alloy aluminium sheet is very good, it can meet the manufacturing conditions of refrigerato
阅读全文

Auminium sheet 5083 H116 VS H321 in marine application

图片
Which of the properties of 5083 H116 and H321 aluminium alloy sheets is better in marine application? It is necessary to know the difference between alloy 5083 aluminum plates H116 and 5083H321 aluminum alloy sheets. According to the contents of CCS Code for Materials and Welding: 1. H116: Aluminum alloy with magnesium content not less than 3.0% after corrosion protection treatment. 2. H321:Magnesium content not less than 3.0% of the aluminium alloy after work hardening and stabilization treatment. Look at the relevant definitions of anti-corrosion treatment and hardening treatment (also refer to the national standard GB): H1* - Hot rolling, strong tension; H2* - Continuous casting and rolling, strong tension and partial toughening; H3* - After internal stress treatment, stable performance; H4* - Painted or coated; H*2-25% hardness treatment, H*4-50% hardness treatment; H*6-75% hardness treatment; H*8-90 hardness treatment. H116: Suitable for 5000 seri
阅读全文